How to Install a Rev-A-Shelf 2-Tier Metal Pull Out Cabinet Basket

Introduction

Installing a Rev-A-Shelf 2-tier metal pull out cabinet basket is an easy way to add more organized storage to your kitchen cabinets. These pull out baskets maximize your cabinet space by bringing items stored in the back of cabinets within easy reach. With a few simple tools and following the manufacturer’s instructions, you can install a Rev-A-Shelf basket in about an hour.

What You Will Need

Before starting the installation, make sure you have the necessary materials:

• Rev-A-Shelf 2-tier metal pull out cabinet basket
• Power drill with Phillips head attachment
• Phillips head screwdriver
• Tape measure
• Pencil
• Level

You will also need to clear out space in the cabinet you want to install the basket in. Remove all stored items so you have room to work.

Step-by-Step Installation

Follow these steps to properly install your Rev-A-Shelf 2-tier metal pull out cabinet basket:

Choose Cabinet Location

Decide which cabinet you want to install the pull out basket in. It should be deep enough to accommodate the basket’s depth. Standard cabinet depths are 24″ or 30″.

Measure the depth of the cabinet to ensure proper fit. The 2-tier Rev-A-Shelf basket is 21″ deep.

Mark Mounting Bracket Locations

Fully extend the basket unit and place it in the cabinet to find the ideal position. Make sure the basket is level.

Use a pencil to mark the locations of the mounting brackets on the sides of the cabinet. You will attach the brackets to the cabinet first, then mount the basket onto the brackets.

Attach Mounting Brackets

Using a power drill and Phillips head attachment, screw the mounting brackets into the cabinet side walls using the marks you made.

Be sure the brackets are level and securely attached.

Mount the Basket

With the mounting brackets installed, slide the basket unit back into the cabinet. Line up the holes on the side of the basket with the brackets.

Insert the provided screws through the basket holes and into the brackets. Tighten the screws with a Phillips head screwdriver to secure the basket.

Test Operation

Once mounted, carefully pull the basket unit out to full extension and push it back in to test operation. The motion should be smooth.

Make any necessary adjustments before loading the basket with stored items.

Loading the Baskets

Once installation is complete, you can organize and load the pull out baskets:

• Place heavier items on the bottom basket. Position light items up top.
• Try to evenly distribute weight in each basket.
• Organize items grouped by use, with things you access frequently toward the front.
• Allow 1-2″ of clearance on all sides of interior cabinet walls.

Maintenance Tips

A Rev-A-Shelf metal pull out cabinet basket requires little maintenance over time. Follow these tips to keep it gliding smoothly:

• Periodically inspect the mounting brackets and tighten any loose screws.
• Lubricate slide tracks with a dry silicone spray every 6 months.
• Avoid overloading the baskets to prevent sagging and warping.
• Clean basket exteriors with mild soap and water as needed.

With proper installation and care, your Rev-A-Shelf pull out baskets can provide years of handy kitchen storage and organization. This transformational system makes the most of your existing cabinet space.

Frequently Asked Questions

What cabinet depths are compatible with Rev-A-Shelf baskets?

Rev-A-Shelf 2-tier metal pull out baskets are designed to fit standard 24″ and 30″ deep base and wall cabinets.

How much weight can the baskets hold?

The maximum weight capacity is 75 pounds for the entire unit. It’s best to evenly distribute weight between top and bottom baskets.

What finishing options are available?

Rev-A-Shelf offers several finishes like chrome, satin, bronze, and powder coated colors to match your cabinetry.

Can I install the baskets myself?

Yes, with some basic DIY skills and tools, you can install Rev-A-Shelf pull out baskets following the manufacturer’s instructions. Expert installation help is recommended if you’re unsure.

Are Rev-A-Shelf baskets reasonably priced?

Rev-A-Shelf offers quality products that are very competitively priced. Expect to pay $100-$300 for a 2-tier basket system.

How do I clean the basket exteriors?

Use a soft cloth with mild soap and warm water. Do not use harsh chemicals or abrasive pads.

Conclusion

Installing a Rev-A-Shelf 2-tier metal pull out cabinet basket is one of the best ways to maximize kitchen storage and accessibility. With some simple tools and basic DIY skills, you can install these handy baskets in about an hour. Follow the manufacturer’s instructions for proper mounting and operation. Keep the baskets maintained as directed. Loading them effectively will provide you with years of organized convenience within easy reach.