How to Cover Chinet Cabinet with Metallic Paper

Supplies Needed

• Metallic paper – Choose the finish and color that complements your kitchen. Get a few extra sheets just in case.
• Scissors
• Ruler
• Pencil
• Craft knife
• Contact cement adhesive
• Smoothing tool like a squeegee or brayer
• Sandpaper

Prep the Chinet Cabinets

Before applying the metallic paper, you need to properly prepare the cabinets.

• Clean the cabinet surfaces thoroughly and remove any oil or grease. Cabinets should be free of dust and debris.
• Lightly sand the cabinets using fine grit sandpaper. This helps the adhesive stick better.
• Wipe off any sanding dust with a clean cloth.
• Fill any cracks, holes, or uneven surfaces on the cabinets with wood filler. Sand again once dry.
• Measure each cabinet door and drawer front carefully to determine the amount of metallic paper needed. Remember to account for edges and wrapping.

Cut the Metallic Paper

• Lay the metallic paper on a flat surface with the colored side facing down.
• Place the cabinet door/drawer front on top and trace the outline using a pencil. Make sure to leave 1-2 inches extra on all sides for wrapping.
• Using a ruler and craft knife, carefully cut along the traced lines.
• Repeat this process to cut pieces for every cabinet door, drawer, and frame.

Apply Adhesive

• Working with one cabinet door at a time, apply a thin even layer of contact cement adhesive on the back of the metallic paper using a brush or roller.
• Also apply a thin layer of adhesive to the front of the cabinet door being covered.
• Allow both surfaces to become tacky for 5-10 mins before bonding.

Adhere Metallic Paper

• Once tacky, carefully align the metallic paper on the cabinet door and smooth from the center towards the edges removing any air bubbles or wrinkles. Use a brayer or squeegee.
• Use sharp razor to trim off any overhanging edges.
• Wrap the metallic paper around the edges and secure neatly with adhesive.
• Repeat this process for all cabinet doors and frames.

Seal and Finish

• Once done, go over the surfaces with a smoothing tool again to secure edges and remove air pockets.
• Use extra adhesive or wood glue for spot touch ups if needed.
• Allow the adhesive to fully cure for 24-48 hours before use.
• Install hardware and handles back onto the covered cabinet doors.

And that’s it! With just some basic tools and materials, you can easily transform the look of your outdated chinet cabinets with modern metallic paper. The metal finish will add some contemporary pop and style to your kitchen. Just make sure to properly prepare the surfaces so the paper adheres smoothly and securely. With this simple dollar store hack, you can revive your old cabinets without spending on new ones.

FAQs About Covering Chinet Cabinets with Metallic Paper

What type of adhesive should I use?

Contact cement adhesive specifically formulated for laminates works best for adhering metallic paper to cabinets. It creates a strong, lasting bond.

What is the best metallic paper thickness?

Go for metallic paper around 0.5-1 mm thickness. Thinner paper may wrinkle while thicker can be hard to cut and work with.

How do I get a smooth finish without bubbles?

Work slowly and methodically when applying the paper. Use a brayer and go over the surface multiple times to remove any trapped air.

Should I remove the cabinet doors before covering?

Yes, it’s best to detach the doors and work on them separately for easier wrapping and smoother results.

How do I cover chinet cabinet frames and edges?

Use adhesive and small trimmed pieces of metallic paper to wrap and adhere on the sides and frames. Fill edges as needed.

Can I use this on plywood cabinets?

Yes, just ensure the surface is smoothed, primed and prepped properly before applying the metallic paper.

How durable is metallic paper on cabinets?

It is quite durable with proper adhesive and care. Avoid direct heat exposure to prevent lifting or peeling over time.

Conclusion

Revamping chinet cabinets with metallic paper is an innovative way to inexpensively remodel your kitchen. With some simple tools, patience, and preparation, anyone can achieve a high-end modern look. Just remember to properly clean and sand the cabinets, measure and cut the paper precisely, apply adhesive smoothly, wrap all edges, seal thoroughly and you will have stylish new metallic cabinets in no time. This easy dollar store hack lets you update the heart of your home without spending thousands.